02 9541 3500
Micromeritics FlowSorb Surface area analyser
Micromeritics FlowSorb provides single-point and multipoint BET surface area measurements with speed, accuracy, and reliability.
| Manufacturer | Micromeritics |
|---|---|
| Product Series | Micromeritics FlowSorb |
| Measurement principle | Physisorption |
| Application | Surface Area & Porosity |
| Surface area | 0.01 m2/g to over 1,000 m2/g |
| Reproducibility | Better than 0.5% |
Micromeritics Autopore Mercury Intrusion Porosimeter
Micromeritics AutoPore Mercury Porosimeters can quickly and accurately determine a material's pore structure in particular pore size, diameter, volume, surface area and bulk and absolute densities.
| Manufacturer | Micromeritics |
|---|---|
| Product Series | Micromeritics AutoPore |
| Measurement principle | Mercury Intrusion Porosimetry |
| Application | Surface Area & Porosity |
| Gas | Nitrogen or other clean, dry gas at 50 psig (345 kPa) |
| Pore Diameter Range | 6 to 0.003 μm |
Micromeritics Autochem Chemisorption Analyser
Micromeritics AutoChem series offer fully automated catalyst characterisation system for highly precise chemical adsorption and temperature programmed reaction studies.
| Manufacturer | Micromeritics |
|---|---|
| Product Series | Micromeritics AutoChem |
| Measurement principle | Chemisorption |
| Application | Surface Area & Porosity |
| Temperature | -100 °C to 1100 °C with CryoCooler |
| Gas Flow Rate (manual) | 0 to 100 mL/minute (Hydrogen) |
Micromeritics ChemiSorb Chemisorption Analyser
Micromeritics ChemiSorb series enables chemical and physical adsorption tests that are central to the development, testing, and production of catalysts.
| Manufacturer | Micromeritics |
|---|---|
| Product Series | Micromeritics Chemisorb |
| Measurement principle | Chemisorption |
| Application | Surface Area & Porosity |
| Surface Area | Minimum: 0.2 m² Maximum: 199.9 m² |
| Pore Volume | Minimum: 0.0001 cm³ Maximum: 0.15 cm³ |
Micromeritics Gemini VII surface area analyser
Micromeritics Gemini VII is a low cost, high speed, simple and reliable analyser used to determine single- and multpoint BET and Langmuir surface areas, total pore volume and micropore analysis.
| Manufacturer | Micromeritics |
|---|---|
| Product Series | Micromeritics Gemini |
| Measurement principle | Physisorption |
| Application | Surface Area & Porosity |
| Surface Area | From 0.1 m², total. From 0.01 m²/g, specific |
| Pore Volume | 4 x 10-6 cm³/g |
ASAP 2020 Plus Surface Area and Porosimetry System
Micromeritics ASAP 2020 Plus provides high-quality surface area, porosity, and chemisorption isotherm data for materials analysis.
| Manufacturer | Micromeritics |
|---|---|
| Product Series | Micromeritics ASAP |
| Measurement principle | Chemisorption, Physisorption |
| Application | Surface Area & Porosity |
| Pressure measurement range | 0 to 950 mmHg |
| Pressure measurement accuracy | > 0.15% of reading |
Micromeritics 3Flex Surface Area Analyser
Micromeritics 3Flex is a fully automated, three-station surface characterisation instrument designed for high resolution adsorption and desorption isotherms.
| Manufacturer | Micromeritics |
|---|---|
| Product Series | Micromeritics 3Flex |
| Measurement principle | Chemisorption, Physisorption |
| Application | Surface Area & Porosity |
| Mimimum measurable Surface Area | 0.01 m2/g |
| Temperature Control | 45 °C, ±0.05 °C with 3 strategically placed RTDs |
Micromeritics TriStar II Surface Area & Porosity Analyser
TriStar II is a an automated, three-station, surface area and porosity analyser that delivers excellent repeatability and speed of analysis.
| Manufacturer | Micromeritics |
|---|---|
| Product Series | Micromeritics TriStar |
| Measurement principle | Physisorption |
| Application | Surface Area & Porosity |
| Pressure measurement range | 0 to 950 mmHg (Resolution 0.05 mmHg, Accuracy 0.1%) |
| Specific Surface Area | From 0.01 m²/g, Nitrogen, 0.001 m²/g, Krypton |
Recent Installations
UWS, Advanced Materials Characterisation Facility (AMCF) have installed their new bench-top Phenom XL Scanning Electron Microscope (SEM).
Phenom XL Desktop SEM
The UWS through collaboration with Phenom-World BV, and ATA Scientific has been able to secure a 2 year placement of the bench-top Scanning Electron Microscope (Phenom SEM)
Phenom GSR SEM
UNSW, School of Chemical Engineering has installed their new KSV NIMA Langmuir-Blodgett Trough
Biolin-KSV NIMA LB Trough
LaTrobe University, School of Molecular Sciences, have installed their new NTA system to investigate extracellular vesicles (exosomes, microvesicles)
Malvern NanoSight NS300
Looking for the most suitable analytical system for your project?
Call us directly on 02 9541 3500 for a free consultation, browse our extensive range online or find the right instrument with our easy to use Product Finder
Browse product range Request FREE Consultation