Cell rupture and liposome processors
AVESTIN C5 BIOTECH PROCESSORvery high pressure homogeniser AVESTIN LIPOSOFAST nano particle sizing and molecular weightAVESTIN C5 BIOTECH PROCESSOR
LAB SCALE, BATCHES 7ml TO 1L
Avestin's C5 lab scale homogeniser rapidly reduces particles and droplets from micron to nanometer sizes. This precision Emulsiflex system is based on the principle of dynamic high pressure homogenisation.
The C5 has an air driven pump - providing homogenising pressure up to 30,000 psi (207 MPa). The maximum flow rate is 5L/Hr, with a minimum processing volume of 7ml, and a hold back volume of less than 1ml.
Click here to contact usHomogenising Valve
The Emulsiflex C5 can be delivered with a dynamic or static homogenising valve. This can easily be disassembled for cleaning or inspection. Sub micron particles or droplets with diameters less than 50nm and an extremely narrow size distribution can be achieved.
Unique design
The beauty of the Emulsiflex design lies in its simplicity! No "O" rings. No gaskets. These user friendly homogenisers are simple to clean (clean-in-place, steam-in-place). The homogenising valve parts can readily be removed for inspection.
Filter/Extruder
The Emulsiflex C5 can be equipped with a high pressure filter/extruder. Applications include the extrusion of emulsions or liposomes through membranes and sterile filtration at high pressure.
AVESTIN LIPOSOFAST
RAPID SMALL VOLUME LIPOSOME PROCESSOR
The LiposoFast extruder allows the research scientist to rapidly process small volumes of liposomes with almost complete sample recovery. A suspension of large multilamellar lipid vesicles is loaded into the glass syringes and manually extruded back and forth through a defined pore diameter membrane.
Click here to contact usThis simple instrument can prepare 0.2 to 1.0mL batches of liposomes. The processing of a sample normally requires 10 to 20 passes and takes about 5-10 minutes.
Membrane pore sizes
The LiposoFast is delivered with a box of 50 polycarbonate membranes having a pore diameter of 100nm. Additional membranes are available with pore sizes of 50, 100, 200, 400, 800, 1000nm and 5 µm.
Cleaning
The components contain glass, Teflon, viton and stainless steel. They are easily cleaned and the entire instrument is autoclavable.
Temperature control
The whole extruder can be immersed in a temperature-controlled water bath to warm lipid suspensions above their transition temperature or to protect heat sensitive compounds.
Scaling-up
Production of larger volumes of liposomes by homogenization and extrusion can be accomplished with the EmulsiFlex Dynamic Processors.
References
Numerous studies have been published using the LiposoFast. For a reference list please contact ATA Scientific.
Contact Us
Please note, information requests are only applicable to Australia, New Zealand, Papua New Guinea and Fiji.
